Oil Resisting Non-asbestos Sheet is made from special Synthetic Fiber heat-resisting fiber, NBR rubber compound heating and compression molding. It eliminates asbestos rubber sheet essentially and thoroughly.
KAXITE Oil Resisting Non-asbestos Sheet is made from kevlar fiber, NBR, aramid fiber, filling materials and dye. Compressed and calendered under high temperature and pressure into a sheet form. It eliminates asbestos rubber sheet essentially and thoroughly. Can be used in oil conditions.
>Suitable for water, high temperature steam, compressed air, joint part of tubing, valve, heat exchanger, etc.
>Can be used in oil conditions.
>100% not including asbestos
>Wide range of temperatures
| Item | Style | ||
| B10220 | B10230 | B10240 | |
| Density g/cm3 | 1.8~2.0 | 1.8~2.0 | 1.8~2.0 |
| Tensile strength ≥Mpa | 6 | 9 | 12.5 |
| Compressibility ≥ % | 12+/-5 | 12+/-5 | 12+/-5 |
| Recovery ≥ % | 40 | 45 | 45 |
| Aging Coefficient | 0.9 | 0.9 | 0.9 |
| Stress Relaxation ≤% | 45 | 45 | 45 |
| Steam Sealing |
Tmax: 200oC Pmax: 2~3Mpa 30min no shock |
Tmax: 300oC Pmax: 4~5Mpa 30min no shock |
Tmax: 400oC Pmax: 8~9Mpa 30min no shock |
| Temperature Max.oC | 200 | 300 | 400 |
| Pressure Max. Mpa | 1.5 | 3.0 | 5.0 |
| Resistance to media | Water, seawater, steam, fuel, gases, salt solutions and many other media | ||
>Black, black with white, blue, green with white, etc. It can be produced following your requirements.
>Available with steel, copper, SS etc. Mesh insertion (B102**M)
>With anti-stick (B102**S), Graphite coating (B102**G)
>Can put your logo on.
>0.4~5.0mm
>2000x1500mm; 1500x4000mm; 1500x1500mm; 1350x1350mm; 1000x1500mm; 1270x1270mm; 3810x1270mm
